 |
Piranha (Allsteel) Hydraulic Press Brake,
Model 35-6, SN-MG-35419 |
$9,500 |
|
 |
|
$21,500 |
|
 |
Pacific J-Series Model J-135-10 Hydraulic Press Brake.
SN-8794 (1979) |
$31,500 |
|
 |
Pacific J-Series Model J90-10 Hydraulic Press Brake.
SN-6749 (1975) |
$31,500 |
|
 |
Amada Model RG-80 Up Acting Hydraulic Press Brake.
SN-805819 |
$17,900 |
|
MECHANICAL BRAKES (Return to Top)
|
 |
Excellsior 6ft. x 25 ton mechanical press brake.
SN-unknown |
$2,750 |
|
 |
Niagara Model 1B-15-3-6 Mechanical Press Brake
SN-P43009 (1967) |
$2,250 |
|
|
Wysong Model 90-10 Mechanical Press Brake. SN-PB56-129
(1975) |
$13,500 |
|
|
|
$2,350 |
|
IRONWORKERS (Return to Top)
|
|
Ironcrafter Single End Hydraulic Punch estimated at 50
ton.
More info as it becomes available. |
$2,950 |
|
|
Kingsland Model 55XA, 65 Ton Hydraulic Ironworker
SN-985998 |
$6,850 |
|
TUBE & PIPE EQUIPMENT (Return to Top)
|
ROLLFORMERS (Return to Top)
|
|
Motorized Rotary Bead & Flange |
$1,150 |
|
|
Duplex Panel Roll former (Make Unknown) |
$8,500 |
|
|
Roll Former Corp. Model SS-10 Standing Seam Snap Cap
Machine SN-9057 |
$5,500 |
|
|
Used Eagle Model CP-30=P Angle Roll.
Age 2005 |
$3,650 |
|
SPOT WELDERS
(Return to Top)
|
|
Acme Type 1-18-15 Air Rocker Type
Spot Welder. SN-11926 (Style FVSS) |
$2,350 |
|
MISC. WELDERS, TORCHES & BURNERS
(Return to Top)
|
|
Hypertherm Model Max40 Hand Held Plasma Torch.
Age: 1994 |
$1,250 |
|
|
Used Miller Syncrowave 350 Tig welder |
$2,700 |
|
NOTCHERS & NIBBLERS (Return to Top)
|
|
Kidder Model 43BMP-S Hydraulic Notcher.
SN-unknown |
$1,950 |
|
|
|
DiAcro Model 2P Power Tab Notcher.
SN- unknown |
P.O.R. |
|
|
Uni-Notch (Comaca) Mechanical Notcher & Punch Model
N225
SN- unknown |
$4,350 |
|
FABRICATING PUNCHES (Return to Top)
|
SLITTING & CUT-TO-LENGTH LINES
(Return to Top)
|
 |
Cincinnati 48" x 14 ga. Cut-to-Length Line | $70,000 |
|
CNC FABRICATING EQUIPMENT
(Return to Top)
|
 |
Amada Pega Model 344 CNC Turret Press SN-P34408680 (1983) | $17,000 |
|
 |
Amada Pega Model 204040 CNC Turret Punch. SN-P2440153 (1986) | $12,000 |
|
 |
Used Amada Pega 244 Model 204040 Turret Press w/ (1) auto index.
SN-AP440136 (1990) | $20,000 |
|
PLATE ROLLS
& ANGLE ROLLS(Return to Top)
|
 |
Used Davi Model MCA-3020 CNC 4-Roll Plate Roll. Age: 2008 | $120,000 |
|
TOOLING AND ACCESSORIES
|
FABRICATION (Return to Top)
|
|
T-Slotted Bed Rail. Same as Uni-Punch Model 5100-120
and Unittool's BR-801 x 10' |
$995 |
|
|
T-slotted plate often used with Unitized tooling (Uni-Punch,
Unittool) |
$750 |
|
|
Used set of (2) Angle Plates off a Verson Press Brake.
5-1/2" machined angle x 6' long. |
$495 |
|
MACHINING (Return to Top)
|
MEASUREMENT (Return to Top)
|
DRILLS
|
TURRET DRILL PRESSES (Return to Top)
|
RADIAL DRILLS (Return to Top) |
 |
Used Yoshida Radial Drill (Japan) | $4,550 |
|
 |
Fosdick 4' Radial Arm Drill SN-17425 (1953) |
$5,650 |
|
DRILLING AND TAPPING (Return to Top)
|
 |
Craftsman 15 1/2" Floor Model Drill Press |
$295 |
|
 |
Brother Model TC-211 CNC Drilling & Tapping Center
SN-111624 (1986) |
$3500 |
|
ROUTERS
(Return to Top)
|
GRINDERS - HONES - LAPPERS
|
ABRASIVE GRINDERS (Return to Top)
|
 |
Timesaver 52"
Single Head Belt Sander. (model 2150) SN 5080 |
$5,650 |
|
 |
Burlington Model HMO1206-1 Belt Sander & Grainer. SN-97453 |
$2,850 |
|
 |
Used Timesaver Model 125-M1 Abrasive Grainer & Sander
SN-9070 |
P.O.R. |
|
SURFACE GRINDERS (Return to Top)
|
 |
Chevalier Model FSG-1840AD Hyd. Surface Grinder |
$9,950 |
|
TOOL GRINDERS (Return to Top)
|
 |
Jack Mill
Machine MFG Tool Grinder (Taipei China) Model PC - 09 SN-73020 |
$1,950 |
|
BUFFERS (Return to Top)
|
LATHES
|
ENGINE LATHES
(Return to Top)
|
 |
American
"Pacemaker" Engine Lathe SN-unknown at this time |
$6,950 |
|
 |
Monarch 16" x
55" Lathe SN-unknown at this time. |
$3,950 |
|
 |
MAZAK 32" x
120" Engine Lathe (4" thru hole) SN-unknown at this time. |
$15,900 |
|
PRECISION and SECOND OPERATION LATHES
(Return to Top)
|
THREADING
(Return to Top)
|
TURRET LATHES
(Return to Top)
|
CNC TURNING
(Return to Top)
|
 |
Taiyo Seki
CNC Lathe with Fanuc 3T Control Model KY-1504N Mach# 1N - 125 |
$10,000 |
|
MILLING MACHINES
|
HORIZONTAL MILLS
(Return to Top)
|
|
Cincinnati
Model 205-12 Horizontal Mill with Vertical Head.
SN-55302P5Z-17 (1972) |
$5,500 |
|
|
Van Norman Model 16
Horizontal Mill. SN-L-3005-157 |
$2,650 |
|
VERTICAL MILLS
(Return to Top)
|
 |
Gorton
Engraver Model 3Z SN-18879 |
$1,300 |
|
 |
Index Model 747 Vertical Mill. SN-16193 (1970)
|
$2,650 |
|
PRESSES
|
GAP FRAME PRESSES
(Return to Top)
|
 |
Aida Model PC-7.2 Gap Press
SN-15207-11-91 (1991) |
Call For Price |
|
 |
AIDA Model PC-10 II Gap Press. SN-00110-1053 |
Call For Price |
|
 |
|
$17,500 |
|
HYDRAULIC PRESSES
(Return to Top)
|
|
|
DAKE H Frame Model 25H Manual Hyd. Press SN-144604 |
$995 |
|
 |
ST Lawrence 4-Post Hydraulic Press Model 75 TON SN-5103 |
$9,500 |
|
 |
Verson Hydraulic Press Model 100 HD-148 SN-4412 |
$15,000 |
|
 |
Beckwood 250 Ton 4-Post Hydraulic Press, SN-23180 |
$15,000 |
|
 |
Denison Multipress Model FQ75, Hydraulic C-Frame Press
SN-26438 (1978) |
$15,500 |
|
 |
Dayton Rogers
70 ton 4-Post Hydraulic Press built for production. |
P.O.R |
|
PUNCH PRESSES
(Return to Top)
|
 |
V & O 90 ton Back Geared OBI Punch Press Sn-90ST-27 |
$16,500 |
|
|
|
Alva Allen Model BT-12 OBI Press SN-GFB24611 |
$1,350 |
|
 |
Federal Back Geared OBI Punch Press Model F8 SN-8-175
(7/1965) |
$15,500 |
|
 |
Kenco 2 Ton OBI Press (Table Mounted) Mech CL. |
$295 |
|
 |
L & J Model 5 OBI Mechanical Clutch Press, Flywheel
Type SN-51925 |
$2,350 |
|
 |
L & J Model 3 OBI Mechanical Clutch Press, Flywheel
Type SN-35635 |
$2,150 |
|
 |
Niagara Model A3 Mechanical Clutch OBI (flywheel Type)
SN-26075 |
$2,350 |
|
 |
Minster Model 5 OBI Punch Press |
$11,500 |
|
 |
Brown & Boggs Model 80-60G OBI Punch Press (Back
Geared)
SN-88198 |
$14,950 |
|
 |
Rousselle Model 1A mechanical clutch OBI press.
SN-8750 |
$1,950 |
|
 |
Federal Model 3-1/2 Mechanical Clutch OBI Press. Age:
1963 |
P.O.R. |
|
 |
Federal Model
5 OBI mechanical Clutch Press, Flywheel type. SN-5-2333 (April 1970) |
P.O.R. |
|
 |
Rousselle
Model 4 Air Clutch OBI Press. Flywheel type. SN-21271 |
P.O.R. |
|
 |
Rousselle
Model 3F Mechanical Clutch, Deep Throat OBI, Flywheel type. SN-14646 |
P.O.R. |
|
 |
Bliss Model
28M OBI Punch Press (Geared) with Air Clutch. SN-H37280, HP20934 (1952) |
$6,000 |
|
|
AIR PRESSES (Return to Top) |
 |
Airam Model
ATP500 (4) Post Air Press With Base SN-5816100500 |
$1,850 |
|
|
STRAIGHT SIDE SINGLE CRANK (SSSC) (Return to Top) |
 |
VERSON #200-C1-42T, Air Clutch, Single Crank Straight Side Press, S/N-12275
|
$19,500 |
|
|
STRAIGHT SIDE DOUBLE CRANK (SSDC) (Return to Top) |
 |
Wayne Model WSN2-150-60 x 72 Straight Side Punch Press |
$18,950 |
|
 |
Southbend Model S2-125-48-30 Double Crank Straight
Side Press,
Air Clutch. SN-89009 (1989) |
$35,000 |
|
 |
Verson Model HS2-250-54-30 Straight Side Double Crank
Press SN-14315 (1957) |
P.O.R. |
|
|
PRESSES - HIGH SPEED (Return to Top) |
|
HARDWARE INSERTING (Return to Top) |
PRESS ACCESSORIES
(Return to Top)
|
 |
Littell 72" Stock Straightener |
$6,500 |
|
|
|
Dallas Industries Cabinet Mounted Air Feed Model
D325 SN-12828 |
$2,600 |
|
 |
Feed Lease Air Feed Model FL 21/2 - 24 x 12 RH |
$1,250 |
|
|
|
Rowe Straightener Model 8-30 SN-25-585 |
|
|
|
|
T-Slotted Bed Rail. Same as Uni-Punch Model 5100-120
and Unittool's BR-801 x 10' |
$995 |
|
|
|
T-slotted plate often used with Unitized tooling (Uni-Punch,
Unittool) |
$750 |
|
|
|
Used set of (2) Angle Plates off a Verson Press Brake.
5-1/2" machined angle x 6' long. |
$495 |
|
COIL CRADLE
(Return to Top)
|
 |
Durant Model 100 Powered Coil Cradle |
$395 |
|
|
|
Rowe Coil Cradle Model 3030-J (Powered)
SN-15441 |
$2500 |
|
COIL REELS
(Return to Top)
|
 |
REGAL Model 10,000-24 SRNP Coil Reel, S/N-127825449
|
$4,500 |
|
 |
American Coil Reel Model 1000 SN-3402 |
$11,500 |
|
 |
Regal Model 3000 36 SRNP-SDB Non-Powered Coil Reel
SN-8792117 |
$1,650 |
|
 |
PRE Model PR-18400-DC Coil Reel SN-1202-040 |
$2,950 |
|
 |
Rapid - Air Coil Reel Model R -5 SN-977 |
$795 |
|
 |
Durant Model VS-DMSC-0 Vari Speed Coil Reel
SN-402397 |
$795 |
|
 |
Littell Duplex Non-Powered Coil Reel. |
$2300 |
|
 |
Littell Duplex Coil Reel SN-78836 |
$1200 |
|
SAWS & FILERS
|
ABRASIVE & COLD SAWS
(Return to Top)
|
 |
Dake/MEP CNC
Automatic Cold Saw SN-501029 |
$5,500 |
|
 |
Stone Model DM-10 Double Miter Saw. SN-0589
|
$2,650 |
|
 |
Scotchman (Bewo) Model CPO-350-LT Cold Saw SN-2579-02-94 (1994)
|
$3,150 |
|
HORIZONTAL BAND SAWS
(Return to Top)
|
VERTICAL BAND SAWS
(Return to Top)
|
 |
Marvel #8 Tilt Head Band Saw. SN-86273 |
$3,650 |
|
MATERIAL HANDLING
|
CRANES
(Return to Top)
|
CRANE ACCESSORIES
(Return to Top)
|
CONVEYORS
(Return to Top)
|
 |
Mayfair International Chip Conveyor. SN-910328 |
$875 |
|
 |
Kings Mountain "Turbo" Chip Conveyor. SN-314556
|
$875 |
|
MISCELLANEOUS MACHINERY
|
|
SCALES
(Return to Top)
|
|
PLASTICS
(Return to Top)
|
|
ELECTRICAL, FANS, ETC
(Return to Top)
|
 |
Hoffman
Electrical Enclosure. Dimensions: 36" W, 36" D, 72" H New |
$650 |
|
OVENS
(Return to Top)
|
|
|
|
Make Offer |
|
FINISHING EQUIPMENT
(Return to Top)
|
 |
Hammond Roto-Finish 10 Cu. Ft. Vibratory w/ auto unload. New motor visable. |
$4,950
|
|
AIR COMPRESSORS
(Return to Top)
|
 |
Gardner Denver "Electra Saver II" Model
EGHSJF Screw Compressor. SN-M40006 |
$4,850 OBO |
|
 |
Sullair Model 10-30-L Air Compressor. NEEDS MOTOR. |
$800 |
|
 |
Used LeRoi Model T30-SS Rotary Screw Air Compressor. SN-4078 X 559 |
$2,750 |
|
 |
Used Sullair Model 10-30L Rotary Screw Air Compressor. SN-30383 (late 70's) |
$2,950 |
|
AIR HANDLING EQUIPMENT
(Return to Top)
|
WOODWORKING EQUIPMENT
|
WOODWORKING EQUIPMENT
(Return to Top)
|
 |
Delta 6” Jointer on caster cart.
110V.
|
$185 |
|
 |
Nicoletti Model T-350 Double Miter
Saw. (2) Available Age: 2000
|
$6,950 |
|
|
|
|
|
|
* -- Indicates
Items NOT Located in Our Dallas Warehouse
